SPECIFICATIONS

Brand Name: Heng Si Cheng

Item Type: Atmosphere lamp

Origin: Mainland China

Voltage: 12V

Item Type: Atmosphere Lamp

Name: Heng Si Cheng

Origin: Mainland China

Color: White,ice blue,blue,red

Length: 60cm,100cm,120cm,150cm,180cm,200cm,220cm,240cm

Features0: Scan Lighting Car

Features 1: Car Hood Light Strip

Features 2: Car Daytime Running Light

Features 3: Daytime Running Lamp

Features 4: Waterproof

Features 6: Auto Diy Cutter Lights

Features 7: Highlight

Features 8: Decorative Ambient Neon Lamp

Features 9: Superbright

Features 10: Upgrate Light

Choice: yes

semi_Choice: yes

Reminder:

1、When installing, be careful not to squeeze the car onto the tail of the light strip, otherwise the light beads will be crushed and damaged, causing the light strip to not light up.

2、The light strip does not support cutting. If the light strip is cut, it will cause asymmetric scanning on both sides when starting scanning.

Describe:

- Light source: LED

- Light colors: white/ice blue/blue/red

- Voltage: 12V

- Length: 60cm/100cm/120cm/150cm/180cm/200cm/220cm/240cm

Feature:

- Newly designed car decorative lights with start-up scanning function

- Side LED and corresponding hood design can provide you better lighting effect.

Installation tips:

- How to install the light strip

1. Apply double-sided tape to the two inner sides of the cover.

2. Fix the light bar on the double-sided tape.

3. Note: The cable position should be close to the windshield side, not close to the end of the central grille, otherwise it will affect the wiring and the normal opening of the hood.

- How to connect the wires?

1. The black wire is connected to the negative pole + the red wire is connected to the ACC = the engine starts to light up.

2. The black wire is connected to the negative pole + the red wire is connected to the DRL = turn on the DRL to light up.

3. The black wire is connected to the negative pole + the red wire is close to the light = the low beam is turned on.

4. The black wire is connected to the negative pole + the red wire is connected to the highlight light = the highlight light is turned on.

Notes:

1. Please allow 0.5-1 inch difference due to manual measurement. (1 inch = 2.54 cm).

2. Due to different computer screens, the actual color may be slightly different from the product picture, thank you for your understanding

3. It should be noted that during installation, please do not allow your car to squeeze the tail of the light strip. If squeezed onto the light strip, it may cause a group of light beads to break and lose their brightness.

4.The light strip does not support cutting. If the light strip is cut, it will cause asymmetric scanning on both sides when starting scanning.